AsapiThe AI Agent Trials
Asapi / Catalogue / Screwed two‑board lap joint by a bimanual robot with a hand‑held drill
Environment datasheet · Robot manipulation

Screwed two‑board lap joint by a bimanual robot with a hand‑held drill

ID llarms/task03 · revision 2 · results as of 29 October 2026

In a simulated robot workshop, the agent drives a two‑handed robot by typed commands to lay two boards crossed, each exactly inside its outline, and fix the overlap with three screws, each pinched, lined up with a hand‑held drill and driven home.

Checks
1, 1 point for the whole build, none for part of it
Tested
1 model, one attempt
Best
0% (GPT‑6.1 Sol)
Full solves
0 of 1
Attempt
20 min
What it tests

Two boards laid crossed and fixed with three screws from a hand‑held drill

Robot control

Each screw has to be pinched, set on the overlap, lined up with the other hand's drill, released as it feeds, and driven home.

How it works

A simulated workshop, two hands, two drills and screws one at a time

The agent's world

A coding agent sends JSON to a local robot server: read the state, or send a motion of 1 to 32 velocity segments.

The robot

Two seven‑joint manipulators on sliding bases, each with a five‑fingered hand that holds by friction alone, so boards can slip, turn or drop.

Limits

One session of 20 minutes of wall time, planning included, with action and simulation‑time budgets; no resets or direct state changes.

The reward

One point only if both boards settle inside outlines of their own size and the joint is rigid with three screws, every drill withdrawn.

Results

Both boards ended outside their outlines, and no screw went in

The dot is the one attempt.

MedianFully solved
1 modelOne attempt0%0 of 1
ModelReward
GPT‑6.1 SolOpenAI0%

This attempt was told an earlier, looser target that accepted boards centimetres off, and not the corner rule; its score uses the strict outlines. A person can complete this build easily.

What models get wrong

It sets both boards down just outside and runs out of time before a screw

Robot control

  1. Both boards came to rest outside their outlines, by 13.8 and 11.4 mm at the worst corner.

  2. Placement never led to a full fastening cycle, so none of the three screws went in and the joint wasn't rigid.

  3. The server stopped the attempt at the 20‑minute limit, after 45 motion commands covering 215 simulated seconds.

Running it

What an attempt takes, and what the environment includes

An attempt

Cost and tokens weren't recorded: the attempt ran on a subscription sign‑in, which logs neither.

What's in it

The frozen runtime with this scenario, the request and interface document, the grader and its self‑test, and the attempt's full record and videos.

Format

Node.js, with the physics in headless Edge and a Python grader; it runs on a Windows PC today, and other packaging is on request.

Fresh variants

Other builds and layouts in the same design, made on request and never published.

The files and grader aren't published; the job's row on The AI Agent Trials, our public benchmark, sums up the job and shows each model's score.

Try one of our three sample environments

Three environments are packaged as samples you can download, with their graders and reference solutions. Ask for them with your work email, or book a call about the rest of the catalogue.